Bhagvati Engineering Works: Manufacturer of Ginning Machines and Rotational Moulds
Ginning Machinery: Conveying Raw Cotton to Press with cleaning Rotational Moulds for Heavy Plastic Products & Plastic Tanks

Double Roller Gin Machine

  • All gears, connecting rod, head pin, beater arm, swing levers etc. are made of high nodularity ductile iron.

  • All rotating parts are provided with bearing to reduce friction for optimum efficiency.

  • Connecting housing is provided with heavy duty self aligning roller bearing.

  • Leather roller shafts are interchargeable and if one side of the roller is worn out, it can be reversed.

  • Lint output remains uniform on full length of the rollers. Moving parts are housed in dust proof gear box for smooth running.

  • Lubrication is by pressure fed & dust proof greasing system.

  • Special hardened bushes for weight levers and swing levers ensure smooth working of gin machine.

Technical Data

Production capacity per 1 hours (approx.) Jumbo Model 60 - 75 to Kg. Lint
Power required 5 HP
Length of the Machine 2150 mm
Type & Nos. of Driving Belts 2 Nos. V - Belts
Type & Nos. of Bearings 21 Nos. (16 ball bearing, 2-roller berings & 3-needle roller berings.)
Type & Consumption of Lubrication 150 gms. grease per 8 hrs. (approx.)
Driving of roller shaft by helical gears
Removal of cotton Lint From front & rear
Floor space required (including electric motor) Jumbo Model 2360 x 1720 x 1170 mm
Minimum Distance between machine 600 mm
Rotation of Driving Pulley Any direction
Weight of the Machine without Autofeder Jumbo Model 915 Kgs. (Approx.)

Free Accesories: Spanner set, beater adjustment gauge, Motor rail pair, Moter pully 5.5 inch "B" Section 2 Grove.

Note: in view of our policy of continously improving our products, we reserve the right to alter specifications or designs without prior notice & without liability. Features shown do not necessarily show the machine / equipments in it's standards form.

 

Double Roller Gin Machine with Auto Feeder

 

  • Drive is taken from roller shaft of machine.
  • Uniform and continous feeding.
  • 4 machines can be fed by only one worker in mannual setup.
  • Auto feeder can be tited/removed with ease, which provides easy access to beater.

We are Located at:

Bhagvati Engineering Works
131, Bileshwar Estate, Opp. Vepari Mahamandal,
Nr. Ring Road, Odhav, Ahmedabad - 382 415  Gujarat - INDIA
Phone : 0-94265-68759 / 0-94276-25566
Or Send Us E-Mail

Home | About Us | Products | Contact
Bhagvati Engineering Works - India - All Rights Reserves.